Classic Mini Cooper Rear Radius Arms, Cone Suspension
Records - of
# |
Part No |
Qty |
Description |
|---|---|---|---|
| 1 | 21A392 | 1 | Swing arm Right hand, reconditioned |
| 1 | 21A393 | 1 | Swing arm, Left Hand, Reconditioned |
| 2 | 2A7351 | 1 | Radius arm stub axle R/H |
| 2 | 2A7364 | 1 | Radius arm stub axle L/H |
| 4 | 2A7352 | 2 | Stub axle circlip |
| 5 | 21A397 | 2 | Bracket on radius arm for hose No longer Available |
| 6 | ACA9099 | 2 | Pin |
| 7 | ATJ4098 | 2 | Roller bearing inner, was 13H442 |
| 8 | 2A7325 | 2 | Bronze bush outer |
| 9 | 21A396 | 2 | Metal grease sleeve, being replaced by plastic sleeve Use kit GSV1125 |
| 10 | 2A7324 | 2 | Outer thrust washer |
| 11 | ACA9302 | 2 | Inner thrust washer |
| 12 | 2A7327 | 4 | Sealing rubber ring |
| 13 | LWZ208 | 4 | Spring washer |
| 14 | FNZ508 | 4 | Nut |
| 15 | UHN400 | 2 | Grease nipple |
| 16 | GSV1125 | 2 | Radius arm repair kit |
| 17 | 21A2023 | 2 | Hub, Less studs |
| 17 | 21A1277 | 2 | Hub with long studs, ‘S’ and 1275GT plus all 1984 on |
| 18 | 21A2064 | 8 | Wheel stud, shaft length 1.375 Thread length 0.875 |
| 18 | 21A2064L | 8 | Wheel stud, shaft length 2.000" 50.80mm Thread length 1.125" |
| 18 | 21A1278 | 8 | Wheel stud, shaft length 2.25" Thread length .875" |
| 18 | ENJO-1039 | 8 | Wheel stud, shaft length 2.375 Thread length 1.107" (28mm) |
| 18 | ERA1268 | 8 | Wheel stud, shaft length 2.437 Thread length 1.000 |
| 19 | 88G322 | 16 | Wheel nuts, round radius chamfer angle |
| 19 | 113087.000 | 16 | Wheel nuts, 60° chamfer angle |
| 20 | CN1/EA | 16 | Chrome wheel nut Alternative to 88G322 |
| 20 | CN4 | 16 | Chrome wheel nut, wide base Alternative to 88G322 |
| 20 | CN2 | 16 | Chrome wheel nut, 60° chamfer angle Weller steel and Rostyle |
| 20 | CN5 | 16 | Chrome wheel nut, wide base Alternative to CN2 |
| 20 | AHA8785 | 16 | Chrome wheel nut, 60° chamfer dome - 1275GT Rostyle |
| 21 | GHS102 | 2 | Metal backed ‘S’ oil seal Use GHS102 |
| 21 | GHS102 | 2 | Hub oil seal |
| 22 | GHK1088 | 4 | Bearing with built in spacer |
| 22 | GHB212 | 4 | Bearing with built in spacer |
| 23 | 2A7354 | 2 | Spacer when GHB116 fitted (Not Timken) |
| 24 | GHK1088 | 2 | Roller bearing kit spacer and seals |
| 24 | GHK1141 | 2 | Timken type tapered roller bearing set with seals |
| 25 | BTA672 | 2 | Hub washer |
| 26 | NL610041 | 1 | Hub nut right hand thread |
| 26 | FNN2410 | 1 | Hub nut left hand thread |
| 27 | ATB4098 | 2 | Grease retaining cap |
| 28 | 21A2454 | 2 | Hand brake quadrant |
| 29 | CLZ549 | 2 | Clevis pin |
| 30 | AWZ105 | 2 | Washer |
