Classic Mini Cooper Front Hydrolastic Displacer Suspension ( Known as Wet Suspension )
Records - of
# |
Part No |
Qty |
Description |
|---|---|---|---|
| 1 | 21A2008 | 2 | Displacer unit (hose part of displacer only) No longer Available |
| 2 | 21A1496 | 2 | Dust excluder |
| 3 | 21A1515 | 2 | Protection sleeve for hose |
| 4 | 21A1487 | 2 | Protection sleeve retainer |
| 5 | 21A1522 | 1 | Adaptor plate bracket |
| 6 | 21A1524 | 2 | Adaptor Union |
| 7 | 17H8236 | 2 | Nut |
| 8 | LWZ410 | 2 | Washer |
| 9 | 21A1687 | 2 | Bracket to hold displacer to subframe No longer Available |
| 10 | 14A7031 | 2 | Plug for bracket |
| 11 | 21A1575 | 1 | Steel hydrolastic pipe, front to rear R/H |
| 12 | 21A1577 | 1 | Steel hydrolastic pipe, front to rear L/H |
| 12 | FSP3 | 2 | Plastic hydrolastic pipe, fits either side Alternative to steel |
| 13 | 2A4325 | 2 | Upper arm support |
| 14 | MSSK1 | 2 | Thrust collar part of kit Available in kit MSSK1 per side |
| 15 | 2A7324 | 2 | Thrust washer |
| 16 | 2A7327 | 4 | Rubber sealing ring |
| 17 | 2A4327 | 2 | Retaining plate No Longer Available |
| 18 | GHF335 | 4 | Spring washer was LWZ308 |
| 19 | FNZ508 | 4 | Nut |
| 20 | 21A1889 | 2 | Lower arm support shaft |
| 21 | 21A1882 | 4 | Lower arm bushes with metal insert All ‘S’ plus 1966 on |
| 21 | WB2 | 1 | Lower arm bush set, polyeurethane Taperd hole in arm |
| 21 | 2A4294 | 4 | Lower arm shouldered bush, no insert Pre 1966 models |
| 21 | WB1 | 1 | Lower arm bush set, polyeurethane Straight hole in arm |
| 22 | GHF333 | 2 | Spring washer was LWZ206 |
| 23 | FNZ506 | 2 | Nut |
| 24 | 21A450 | 2 | Tie rod |
| 25 | 53K1031 | 2 | Tie rod bolt Available as kit 8G4249 per side |
| 26 | FNZ505 | 2 | Nut |
| 27 | GHF332 | 2 | Washer |
| 28 | 31G1155 | 4 | Tie bar bush |
| 29 | ACA9759 | 2 | Cup washer |
| 30 | PWZ207 | 2 | Flat washer |
| 31 | GHF224 | 2 | Nut |
| 32 | 21A1598 | 2 | Bump stop |
| 33 | HBZ420 | 2 | Bolt No longer Available |
| 34 | LWZ204 | 2 | Spring washer |
| 35 | FNZ104 | 2 | Nut |
| 36 | 2A4267 | 2 | Rebound buffer |
| 37 | 13H2776 | 2 | Screw |
| 38 | 21A1163 | 2 | Knuckle joint Aftermarket |
| 38 | GSV1118 | 2 | Knuckle joint Genuine Type |
| 39 | 21A423 | 2 | Nylon cup Part of GSV1118 |
| 40 | 21A425 | 2 | Dust cover |
| 41 | 21A1845 | A/R | Packing washer to raise suspension |
