× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items

Another great product from K&N - a name that you know and trust!

The K&N Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit the Gen3 F-Series Mini Cooper and Cooper S models. 

NOT FOR SALE IN CALIFORNIA - We are not able to ship this product to California addresses.

Fits the following MINI Cooper and Cooper S models:
2014-2019 F56 MINI Cooper and Cooper S Hardtop
2015-2019 F55 MINI Cooper and Cooper S Hardtop 4-Door
2014-2019 F57 MINI Cooper and Cooper S Convertible
2016-2019 F54 MINI Cooper and Cooper S Clubman
2017-2019 F60 MINI Cooper and Cooper S Countryman

Fits the following JCW models:
2016-2018 F56 JCW MINI Cooper S Hardtop
2016-2018 F57 JCW MINI Cooper S Convertible
2016-2018 F54 JCW MINI Cooper S Clubman
2016-2018 F60 JCW MINI Cooper S Countryman

Compatible with USA and Canadian models. (NOT for Euro models).

The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. In addition to more power, this air intake system improves engine sound with more aggressive and deeper acoustics during acceleration.

Included is a black rubber topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through the intake tube into the engine’s turbo inlet for a guaranteed power gain. The intake tube has an attractive black powder-coated finish that's made to last and it accommodates the factory mass air sensor. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench.

Features:

  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Low restriction aluminum tube
  • Easy to install, usually in 90 minutes or less
  • Filter lasts up to 100,000 miles before service is required
  • Replaces stock air intake system
  • Washable and reusable lifetime air filter
  • K&N Million Mile Limited Warranty
  • Street legal in most states (not street legal in CA)

Dyno result:  2015 Mini Cooper 1.5L;  6.55hp @ 3200rpm and 11.05lb-ft @ 3200 rpm  (Horsepower gains based on specific or similar vehicle dynamometer test. Results will vary.)

See Mini Cooper K&N Typhoon Installation Instructions.

The K&N Solution for your 3rd Generation MINI

This Intake Kit is an easy to install performance upgrade and comes with all the hardware necessary for installation. A mandrel-bent aluminum air intake tube replaces a portion of the factory turbo inlet pipe to help streamline airflow into the turbocharger. This tube incorporates a mounting location for the factory mass airflow sensor and is finished in a durable flat black powder coat.

Attached to the new K&N air intake tube is K&N conical performance air filter. This filter is designed to help minimize restriction in the airflow pathway while the oiled cotton gauze filtration media provides superior engine protection. Another benefit of this K&N air filter’s design is that it’s washable and reusable and can go up to 100,000 miles between cleanings, depending on driving conditions. The filter is shrouded by an application specific heat shield, and reuses the factory fresh air ducting to help provide cooler air from outside the engine bay.

Put all of these precision-engineered parts together and you have a recipe for increased performance. On the dyno a 2015 Mini Cooper 1.5 liter turbo produced an estimated additional 6.5 horsepower at 3200rpm and 11.0 pound-feet of torque at 3200rpm with this kit. For a small 1.5 liter engine, those are some impressive power gains. This kit installed on a stock 2016 JCW model produced an estimated additional 9.01 horsepower at 5400 rpm and 6.21 pound-feet of torque at 4350rpm!  

K&N backs its air filters and air intake systems with a 10-year/million mile limited warranty and a Consumer Protection Pledge so Mini enthusiasts can feel confident that their automotive cultural icon is covered. The heart and soul of what began over 50 years ago with the Mini Cooper is alive and well today in the newest generation. Give your little piece of history a boost in performance with the K&N Typhoon performance air intake system.

NOTE:  This product is NOT CARB approved.  Always check your current local regulations on compliance for street use.

K&N Engineering, Inc., requires cleaning the intake system’s air filter element every 100,000 miles. When used in dusty or off-road environments, our filters will require cleaning more often. We recommend that you visually inspect your filter once every 25,000 miles to determine if the screen is still visible. When the screen is no longer visible some place on the filter element, it is time to clean it.

For care and maintenance of the filter in this kit, see K&N Filter Care Kit.

See other Gen3 Intake Upgrade options:

 

Dramatically reduce air flow restriction allowing your engine to inhale a larger amount of air than the factory air intake. Improves power and acceleration and produces more aggressive engine sound.
Cold Air Intake K&N Typhoon | Gen3 MINI Coopers F55 F56 F54 F57 F60 thru 2019

Cold Air Intake K&N Typhoon | Gen3 MINI Coopers F55 F56 F54 F57 F60 thru 2019

Cold Air Intake K&N Typhoon | Gen3 MINI Coopers F55 F56 F54 F57 F60 thru 2019

Cold Air Intake K&N Typhoon | Gen3 MINI Coopers F55 F56 F54 F57 F60 thru 2019

Cold Air Intake K&N Typhoon | Gen3 MINI Coopers F55 F56 F54 F57 F60 thru 2019

Cold Air Intake K&N Typhoon | Gen3 MINI Coopers F55 F56 F54 F57 F60 thru 2019

Cold Air Intake K&N Typhoon | Gen3 MINI Coopers F55 F56 F54 F57 F60 thru 2019
Part No: G3NME2310
$609.21
Qty:
Fits the following:
MINI (2002-Current)
PayPal Pay Later
Alternate Products
MINI Cooper Cold Air Intake Gen3 F56 F55 F57 F54 F60 thru 2019
$408.46 MINI Cooper Cold Air Intake Gen3 F56 F55 F57 F54 F60 thru 2019
Mini Cooper S Dinan Carbon Fiber High-Flow Intake Gen3 F55 F56 F54 F57 F60 thru 2019
$479.84 Mini Cooper S Dinan Carbon Fiber High-Flow Intake Gen3 F55 F56 F54 F57 F60 thru 2019

Another great product from K&N - a name that you know and trust!

The K&N Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit the Gen3 F-Series Mini Cooper and Cooper S models. 

NOT FOR SALE IN CALIFORNIA - We are not able to ship this product to California addresses.

Fits the following MINI Cooper and Cooper S models:
2014-2019 F56 MINI Cooper and Cooper S Hardtop
2015-2019 F55 MINI Cooper and Cooper S Hardtop 4-Door
2014-2019 F57 MINI Cooper and Cooper S Convertible
2016-2019 F54 MINI Cooper and Cooper S Clubman
2017-2019 F60 MINI Cooper and Cooper S Countryman

Fits the following JCW models:
2016-2018 F56 JCW MINI Cooper S Hardtop
2016-2018 F57 JCW MINI Cooper S Convertible
2016-2018 F54 JCW MINI Cooper S Clubman
2016-2018 F60 JCW MINI Cooper S Countryman

Compatible with USA and Canadian models. (NOT for Euro models).

The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. In addition to more power, this air intake system improves engine sound with more aggressive and deeper acoustics during acceleration.

Included is a black rubber topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through the intake tube into the engine’s turbo inlet for a guaranteed power gain. The intake tube has an attractive black powder-coated finish that's made to last and it accommodates the factory mass air sensor. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench.

Features:

  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Low restriction aluminum tube
  • Easy to install, usually in 90 minutes or less
  • Filter lasts up to 100,000 miles before service is required
  • Replaces stock air intake system
  • Washable and reusable lifetime air filter
  • K&N Million Mile Limited Warranty
  • Street legal in most states (not street legal in CA)

Dyno result:  2015 Mini Cooper 1.5L;  6.55hp @ 3200rpm and 11.05lb-ft @ 3200 rpm  (Horsepower gains based on specific or similar vehicle dynamometer test. Results will vary.)

See Mini Cooper K&N Typhoon Installation Instructions.

The K&N Solution for your 3rd Generation MINI

This Intake Kit is an easy to install performance upgrade and comes with all the hardware necessary for installation. A mandrel-bent aluminum air intake tube replaces a portion of the factory turbo inlet pipe to help streamline airflow into the turbocharger. This tube incorporates a mounting location for the factory mass airflow sensor and is finished in a durable flat black powder coat.

Attached to the new K&N air intake tube is K&N conical performance air filter. This filter is designed to help minimize restriction in the airflow pathway while the oiled cotton gauze filtration media provides superior engine protection. Another benefit of this K&N air filter’s design is that it’s washable and reusable and can go up to 100,000 miles between cleanings, depending on driving conditions. The filter is shrouded by an application specific heat shield, and reuses the factory fresh air ducting to help provide cooler air from outside the engine bay.

Put all of these precision-engineered parts together and you have a recipe for increased performance. On the dyno a 2015 Mini Cooper 1.5 liter turbo produced an estimated additional 6.5 horsepower at 3200rpm and 11.0 pound-feet of torque at 3200rpm with this kit. For a small 1.5 liter engine, those are some impressive power gains. This kit installed on a stock 2016 JCW model produced an estimated additional 9.01 horsepower at 5400 rpm and 6.21 pound-feet of torque at 4350rpm!  

K&N backs its air filters and air intake systems with a 10-year/million mile limited warranty and a Consumer Protection Pledge so Mini enthusiasts can feel confident that their automotive cultural icon is covered. The heart and soul of what began over 50 years ago with the Mini Cooper is alive and well today in the newest generation. Give your little piece of history a boost in performance with the K&N Typhoon performance air intake system.

NOTE:  This product is NOT CARB approved.  Always check your current local regulations on compliance for street use.

K&N Engineering, Inc., requires cleaning the intake system’s air filter element every 100,000 miles. When used in dusty or off-road environments, our filters will require cleaning more often. We recommend that you visually inspect your filter once every 25,000 miles to determine if the screen is still visible. When the screen is no longer visible some place on the filter element, it is time to clean it.

For care and maintenance of the filter in this kit, see K&N Filter Care Kit.

See other Gen3 Intake Upgrade options:

 

 
 
Question:
I have a 2018 MINI Cooper JCW and planning to change the air intake unit. I am wondering if it is harmful to the engine as it lets more dust and dirt into the engine? And can you give any suggestions on the brand that I should be checked? I am planning to buy a K&N air intake... Thanks
Answer:
The G3NME2310 K&N filters do a much better job at filtering than standard OE filters, it won't let more dust in.

Mini Mania Tech Team

The MINI Cooper Parts and Accessories Experts

 
 
 
 
Question:
Does this work for the 2019 New MINI Cooper JCW F56 as well?
Answer:
Yes, the Gen3 intake upgrades are compatible for the Cooper, Cooper S, and the JCW models.

Mini Mania Tech Team

The MINI Cooper Parts and Accessories Experts

 
 
 
 
Question:
The warning box says won’t fit 2020 F60 MINI Cooper S Countryman but fits the 2019, according to dealer they’re the same. So does it or does it not fit?
Answer:
The Manufacturer lists this product only for the 2014-2019 models only, so that is why we do not list it for the 2020 Model. If MINI themselves have confirmed that the 2019 and 2020 models share that same intake system parts, then it very well should fit, but having not tested ourselves we do not know for sure and are relying on the K&N's application guide for information.

Mini Mania Tech Team

The MINI Cooper Parts and Accessories Experts



 
 
 
 
Question:
Is the intake safe to run without a tune long-term?
Answer:
Yes, absolutely. The computer in your MINI will compensate for the changes by the K&N Typhoon intake.
 
 
 
 
Question:
I have a 2019 F56 MINI Cooper S, europe model. I'm interested in different products : for example G3NME2310 and G3NME4301 and other parts , but it is specified: "Compatible with USA and Canadian models. (NOT for Euro models). For US models only" What are the reasons this product don't match or don't work with my europ f56 cooper s???? Can you explain it to me? thank you a lot
Answer:
Good question. The reason these do not work with non-US market cars is due to the different sensor connectors - EUR models all have different connectors for each sensor that this unit is not compatible with. 
 
 
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Related Technical Articles:
MINI Performance Air Intakes and Air Filters | Gen3 F54-F57, F60
Created: January 09, 2020
Find the performance air intakes, air filters, and kits you need for your 2014+ MINI Cooper and Cooper S F54 F55 F56 F57 F60
Intake Kits & Parts for F54-F60 MINI Cooper and Cooper S
Created: September 05, 2017
Intake upgrades are all about improving the flow of filtered air into the engine. More air means stronger and more efficient combustion and the net result is more power!
Find the best Intake Upgrade for your MINI Cooper
Created: April 08, 2016
Mini Cooper Intake Upgrades are designed to improve the flow of air into the engine by replacing the restrictive stock airbox and filter. Gains are typically felt in the mid-to-upper RPM with typical horsepower gains of 4 to 6 HP.
All About K&N Cold Intakes for MINI Coopers
Created: February 26, 2016
Cold Air Intake upgrade is one of the simplest performance upgrades you can do to your Mini Cooper and Cooper S. Whether it is a simple filter replacement or a complete Intake Kit, these products are 'bolt-on' solutions with no permanent modifications to the Mini and completely reversible to stock
Mini Cooper Cold Air Intake K&N Typhoon Installation Instructions
Created: December 30, 2015
The K&N Typhoon air intake is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range.