Alternate Products
![Vibration Damper Front Pulley Thin A-series Rebuilt | Classic Mini | Sprite & MG Midget | Morris Minor Vibration Damper Front Pulley Thin A-series Rebuilt | Classic Mini | Sprite & MG Midget | Morris Minor](/images_temp/5050101c-cam4929r.jpg)
$200.98
Vibration Damper Front Pulley Thin A-series Rebuilt | Classic Mini | Sprite & MG Midget | Morris Minor
![Vibration Damper Front Pulley Thick A-series Rebuilt | Classic Mini | Sprite & MG Midget | Morris Minor Vibration Damper Front Pulley Thick A-series Rebuilt | Classic Mini | Sprite & MG Midget | Morris Minor](/images_temp/5050101cam4929r.jpg)
$112.95
Vibration Damper Front Pulley Thick A-series Rebuilt | Classic Mini | Sprite & MG Midget | Morris Minor
Competition damper for hot street or race engines made by BHJ. This is a one piece damper so if used at 6000+ RPM for long periods rebuilding is recommended every two years.
- Fits BMC A-Series 1275cc 4-Cyl.
- Race Prepared with OE-Type Pulley Design
- Integral 3/8" V-Belt Pulley In Stock Location On Inertia Ring
- Internal Balance
- 4.765" O.D.
- 1.775" Overall Length
- 3.3 lbs. Gross Weight
- Billet Steel Construction
- SFI 18.1 Certified
Question:
How does the harmonic balancer come off this car? A standard puller won't work. There is no hole for the shaft of the puller to go through. Instead, there is just a pin that appears to have been pressed in place.
Answer:
Here is what the manual says:
Remove screws (arrows).
Feed out and remove the vibration damper (1).
![](https://www.minimania.com/imagesmaster/crank-pulley.jpg)
No mention of any special tools
Remove screws (arrows).
Feed out and remove the vibration damper (1).
![](https://www.minimania.com/imagesmaster/crank-pulley.jpg)
No mention of any special tools
Mini Mania Tech Team
The Classic Mini Parts and Accessories Experts
Competition damper for hot street or race engines made by BHJ. This is a one piece damper so if used at 6000+ RPM for long periods rebuilding is recommended every two years.
- Fits BMC A-Series 1275cc 4-Cyl.
- Race Prepared with OE-Type Pulley Design
- Integral 3/8" V-Belt Pulley In Stock Location On Inertia Ring
- Internal Balance
- 4.765" O.D.
- 1.775" Overall Length
- 3.3 lbs. Gross Weight
- Billet Steel Construction
- SFI 18.1 Certified
Question:
How does the harmonic balancer come off this car? A standard puller won't work. There is no hole for the shaft of the puller to go through. Instead, there is just a pin that appears to have been pressed in place.
Answer:
Here is what the manual says:
Remove screws (arrows).
Feed out and remove the vibration damper (1).
![](https://www.minimania.com/imagesmaster/crank-pulley.jpg)
No mention of any special tools
Remove screws (arrows).
Feed out and remove the vibration damper (1).
![](https://www.minimania.com/imagesmaster/crank-pulley.jpg)
No mention of any special tools
Mini Mania Tech Team
The Classic Mini Parts and Accessories Experts
Recommended items for: COM797
Loading...
![Loading...](/Images/ajax-loader2.gif)
Loading...
Loading...
![Loading...](/Images/ajax-loader2.gif)
Loading...
![Loading...](/Images/ajax-loader2.gif)
Loading...
![Loading...](/Images/ajax-loader2.gif)
Loading...
![Loading...](/Images/ajax-loader2.gif)
Loading...